| AirGrit Etching System Model 7205C Part # Z0145-009-00
Under-Line Tabletop
With a marking area of 1-1/2" (3.2 cm), the marking head is mounted in a recessed table for sitting position marking or production line operation.
Airgrit etching systems are used to permanently identify glass, metals, ceramics, plastics or other fragile materials with hard, anodized or highly polished surfaces. Airgrit etching is a stress-free, marking process that will not distort or fracture the shape of delicate or thin-walled parts. Operating on a forced-blast principle, the systems produce a frosted or etched impression on the surface of flat or round parts by blowing fine abrasive grit through the relieved portion of a rubber mask. The result is a high-quality frosted impression that contrasts with the product's surface.
Under-Line Tabletop
Easy operation & minimal maintenance
With a quick release stencil plate, Airgrit operation is fast, simple, and reliable. An operator can learn the system in minutes.
High quality frosted impressions in a fraction of a second.
By providing a permanent and distinctive mark, this system is ideal for promoting brand recognition, date and batch code, traceability, inspection and instructional marking.
Less than a penny per mark.
The Airgrit system does not require the high energy and consumables costs required by most marking technologies.
Safe, permanent indetification without chemicals or acids
Airgrit etching is a stress-free marking process that won’t distort or fracture the shape of delicate or thin-walled parts.
Fixtures
Airgrit marking is not limited to just flat surfaces. For round parts, we can produce a urethane nesting fixture to fit the contour of almost any item to be marked.
Rubber Masks
Rubber masks for use with Airgrit machines are molded from special rubber intricately relieved with "stencil style" lettering, trademarks and logos as small as 1/16" high. Designs are reproduced with amazing clarity. The rubber is durable to provide optimum readability and long mask life and results in an extremely low cost per mark. Special strip masks are available for serializing and sequential numbering.
Dimensions
Dimensions:
Height:
28" (711.2 mm)
Width:
15" (381 mm)
Depth:
15" (381 mm)
Other
Grit Capacity:
3 lbs (1.4 kg)
Utilities
Air Consumption:
55 SCFM @ 40PSI (1.16 SCMM @2.76 BAR)
Air Pressure:
80-100 psi
Amperes:
1.50
Electrical:
115V
220 V Optional (50/60 Hz)
Decorative glass etching
Dry etching highly polished metal surfaces
Etching batch/lot codes on cut glass
Etching logos/codes on lenses and glasses
Etching logos/trademarks on cut tempered glass
Etching or printing logos on windows
Glass logo etching
Inspection marks on glass products
Includes: air filter, regulator, guage and 15 lbs of #180 Grit.
|
All prices are in Canadian Currency