NFA1000 3D EMF Meter / Logger Includes:

·         Plastic Carrying Case – K5 (33x27x8) cm

·         NFA1000 EMF Meter

·         Users' Guide

·         2 Year Warranty Certificate

·         Grounding Cable – 17 foot - for AC electric field measurements

·         Grounding Clip – For direct connection to water pipe

·         120 VAC Battery Charger (220 VAC charger available on request)

·         Rechargeable Battery Pack

·         4GB High Speed SD Memory Card

·         USB SD Memory Card Reader

·         USB Interface Cable

·         Interface Cable - 2.5mm to 2.5mm – For connection to HFE59B

·         Silicone protective cover - yellow

Features:  

3D - AC Electric and Magnetic Field Analyzer / Data Logger
Frequency ranges
	Frequency range  (from ... to)		5 Hz 1MHz
	Frequency selective filter  16.6 | 50/60 | 100/120 | 150/180 | Rest < 2kHz | >2kHz		P
Magnetic flux density
	Measuring range "M" in Nanotesla   (alternatively displayed in Milligauss)
	Internal 3D sensor (isotropic point < 3cm3)  (pat. pend.)		P
Electric field strength
	Measurement range in Volt per meter (V/m)              Optional range extension upon request
	Internal potential-free 3D-E-field sensor (Patent DE 10 2007 025 911)		P
	Internal potential-free 1D-E-field sensor in Y-direction
	Internal sensor bound to earth potential in Y-direction (TCO Recommendation)		P
	Input for the measurement of capacitive body coupling acc. to SBM (hand electrode opt.)
Optional sensors ("CH 4")
	TCO compliant E-field sensor (diameter 30 cm, mountable)		opt.
	Magnetostatic sensor		opt.
	Electrostatic sensor		opt.
	Input for AC or DC signals (for instance for the connection of an HF analyser)		P
Signal analysis
	True RMS		P
	True RMS hold / Peak hold		P
	Peak value, broad band (true peak of the wave)		P
Display features
	Large LC display (4 digits), also easy to read from afar		P
	Frequency indication by differently coloured LEDs or by numerical value		P
	Acoustic signal (Geiger-counter-effect, volume adjustable)		P
Internal data logger
	Sampling rate: 110,000 samples/sec., maxima are saved up to 10 times/sec onto the SDHC card. Simultaneous and frequency selective for XYZ and CH4, i.e. without "blind spots".		P
	Voice recorder		P
	Configuration and evaluation software for PC: Innovative graphical and statistical functions, frequency- and axis-specific		P
	Instrument "lockable" to assure safe recordings in the case of unauthorised access		P
Scope of supply and optional accessories
	Internal Li-Ion battery pack (for up to 48 h "full speed"-recordings, NFA 30M more than 48h)		P
	AC-adaptor for quick loading or for mains supply (unlimited recordings possible in this case)		P
	Terminal nut for the stand integrated at the bottom of the housing		P
	Grounding cable		P
	Floating potential telescopic rod (PM4s) or  instrument holder (PM1)		opt.
	Compact plastic transport case K5		P
			Rev. 4.0 as of February 2011, subject to change without prior notice

 Calibration Certificate:

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments.  This guarantees that every NFA1000 meter made by Gigahertz has been individually calibrated to a traceable standard. An official calibration certification plus data is available upon request. Please contact us for the current rates.

Technical Data:

Frequency Response	Flat Frequency Response from 5Hz to 1 MHz at -1db
Electric Field Sensor	3D – X Y Z
Magnetic Field Sensor	3D – X Y Z
Signal Rating	RMS, RMS Hold, Peak
Magnetic Field Measuring Range	1-19,990 nanoTesla (0.01 – 199.9 milliGauss)
Electric Field Measuring Range	0.1-199 Volts/meter - V/m
Body Voltage	1-19,999 mV
Resolution Magnetic Field	Finest Reading - 1nT (0.01mG)
Resolution Electric Field	Finest Reading - Fine Range - 0.1V/m
Accuracy / Basic Tolerance	Compensated, better than -2 dB
Dimensions	78x230x37 mm (WxLxH) approx 3x9x1.5 inches
Weight of Meter	600 g
Case Material	Plastic case with protective silicone holster