| Gigahertz Solutions Professional Level EMF Meter ME3951A
Electronic innovations as well as manufacturing trends towards energy efficiency and high performance have created unprecedented assessment challenges for EMF technicians. The extended frequency capability of the ME 3951A Meter provides a measurement solution for the increasingly high frequency ranges produced by new technologies.
5Hz to 400 KHz, a frequency range unmatched by any other meter in its price range
Single axis measurement combined with easy peak value readings puts detection control in the hands of the technician by facilitating source direction identification
F1B2H31 built in frequency filter provides three filter settings that manually isolates frequency clutter which allows for source identification accuracy
AC/DC outputs provide hook up to specialized equipment for functions such as data logging, full audio assessments and full spectrum analysis
A manufacturer's calibration certificate and a self test mode translate into reliable measurement and verifiable accuracy
Includes a NiMH rechargeable battery and charging unit
Precise potential free (without a ground) measurement option
Plastic Carrying case included
All Gigahertz Solutions are backed by a 2 year manufacturer's warranty
ME3951A EMF Meter Includes:
Plastic Carrying Case K5 (33x27x8) cm
ME3951A EMF Meter
Users' Guide
2 Year Warranty Certificate
Grounding Cable 17 foot - for AC electric field measurements
Grounding Clip For direct connection to water pipe
120 VAC Battery Charger (220 VAC charger available on request)
9V Rechargeable Battery
Features:
-
Auto Power Off: saves on battery use will auto-power off after 40 min of continuous EMF testing
-
Audible Tone: audio assessment - audio signal proportional to field strength (Geiger Counter Effect)
-
LCD Display: easy to read 3.5 digit display
-
Frequency Filter: built in, F1B2H31 frequency filter: four filter settings that provides manual frequency analysis:
-
5 Hz to 400KHz Complete frequency range of meter Best suited for tripod measurements
-
16.7 Hz Electric Railway (Europe Only)
-
50 Hz to 400KHz Typical measurement setting Captures low and high frequency emissions
-
2KHz to 400KHz High Frequency Transients and ``Dirty Electricity``
-
AC/DC Outputs: facilitates equipment interfacing: oscilloscopes/ spectrum analyzers/full audio assessment/ data logging (0.5 mV DC per digit)
-
Power Supply: rechargeable battery (NIMH supplied) compatible with 9 Volt alkaline battery
-
Battery Recharging Unit: 12VDC battery charger supplied
-
Battery Low Indicator: meter will auto-power off 3 minutes following battery low signal display
-
Operating Time: NIMH provides 6 to 8 hours continuous use. Alkaline disposable provides up to 24 hrs continuous EMF testing
-
Self Test Mode: a test for zero setting - verifies measurement accuracy and meter calibration (please refer to product manual for a more detailed explanation)
-
Carrying Case: sturdy plastic storage/carrying case included
-
AC Electric Field: Value displayed in Volts per meter
-
AC Magnetic Fields: Value displayed in nanoTesla ``nT``. Note: 100nT = 1mG
-
Singe Axis Measurement: Beneficial for source detection
Calibration Certificate: During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every ME 3951 meter made by Gigahertz has been individually calibrated to a traceable standard. An Official factory calibration certification and data is available upon request for a fee of $ 211.00 CAD. This would be considered a custom order and an additional 2-3 weeks is required for this process.
Technical Data:
|
Frequency Response |
Flat Frequency Response from 5Hz to 400KHz at -1db |
|
Electric Field Sensor |
Single Axis Directional |
|
Magnetic Field Sensor |
Single Axis Directional |
|
Signal Rating |
RMS |
|
Magnetic Field Measuring Range |
Fine :0.1-199nanoTesla (0.001-2 milliGauss)
Coarse : 1-1999nanoTesla (0.001-20 milliGauss) |
|
Electric Field Measuring Range |
Fine:1-199 Volts/meter
Coarse:1-1999 Volts/meter |
|
Resolution Magnetic Field |
Finest Reading - Fine Range - 0.1nT (0.001mG)
Finest Reading - Coarse Range - 1nT (0.01mG) |
|
Resolution Electric Field |
Finest Reading - Fine Range - 0.1V/m
Finest Reading - Coarse Range - 1V/m |
|
Accuracy / Basic Tolerance |
+/- 2% @ 50hz, 20 degrees Celsius, 45% relative Humidity
+/- 7 Digits |
|
Linearity Deviation |
Fine-199 nT +/- 0.3nT // 199V/m +/- 0.2 V/m
Coarse-1999 nT +/- 3nT // 1999V/m +/- 2V/m |
|
Offset |
Fine-199 nT +/- 0.4nT // 199V/m +/- 0.4 V/m
Coarse-1999 nT +/- 4nT // 1999V/m +/- 4V/m |
|
Dimensions |
74x122x31 mm (WxLxH) approx 3x4-3/4x1.25 inches |
|
Weight of Meter |
196 grams |
|
Case Material |
Plastic |
|
All prices are in Canadian Currency