Gigahertz Solutions Professional Level RF Analyzer HFE59BRF

Sophisticated Source Identification Plus Enhanced Accuracy Features Make this Radio Frequency Analyzer an RF Technician's 1st Choice.

· Equipped with Two Antennas - The 3D Ultra Broadband Isotropic UBB27 Antenna assimilates and reads the RF exposure conditions typical for a human body. Provides a 360 degree RF snap shot – Boosted Frequency Range of 27 MHz– 3.3GHz– Outstanding High Frequency Measurement Performance; the directional Logarithmic– Periodic Antenna facilitates source identification. Readings increase when the antenna is pointed in the direction of or moved closer to offending sources – Frequency Range of 800MHz to 2.5 GHz

· High Pass Filter HP800 G3: This accessory filters out lower frequency signals (below 800 MHz) allowing for more comprehensive analysis of RF measurements

· Optional Pulsed Signal Setting or Analogue Signal Setting: Allows for in–depth signal identification and RF risk assessment. Studies show that digital signals have the greatest biological impact

· AC/DC Outputs for Data Logging Functions: Allows for thorough test site assessment through data logging. Also designed to interface with computers and the NFA 1000 Data Logger

· Detects RF radiation generated by cellular phones and cordless phones (DECT); microwave ovens; Radar; wireless communication devices (such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games); smart meters; cell phone towers in the operational range of 800MHz @ 2.5 GHz (GSM, UMTS, 2G, 3G, 4G)

· The UBB27 Antenna in addition detects RF radiation generated by TV; FM Radio; Amateur Radio; Digital & Analog TV

· Three Measuring Ranges: (Coarse: 1.0 – 19,999 µW/m² ; Medium: 0.1– 199.9 µW/m²; Fine: 0.01– 19.99 µW/m²) Medium range and Fine range options provide added value when needing accurate assessment of moderate to weaker signals

· Comes Equipped with the Attenuator DG20 G3: the Attenuator boosts the meter's maximum measuring range by a factor of 100 (20 dB) which means stronger exposure levels can be accurately assessed up to 2,000,000 µW/m²

· Peak Hold Feature guarantees accurately capturing momentary pulses, as in those emitted by smart meters

· The meter's audio tone replicates the patterns and intensity of measured RF emissions

· Comes equipped with both the NiMH rechargeable battery and battery charger, a storage/carrying case designed to hold all of the HFE59B components, it can accommodate an additional RF meter or EMF meter

Designed to meet Bau–Biologie RF measurement performance requirements

HFE59B RF Meter Includes:

· Plastic Carrying Case – K2 (33x27x16) cm

· HFE59B Radio Frequency Analyzer

· Antenna - Ultra Broadband Isotropic (27 MHz to 3.3 GHz) (UBB27)

· Antenna - Logarithmic Periodic 800MHz – 2.5GHz vertically polarized

· Plastic Antenna Cover – UBB27

· Users Guide – RF Analyzer and UBB27 Antenna

· 2 Year Warranty Certificate

· Rechargeable Battery Pack

· 120 VAC Battery Charger (220 VAC charger available on request)

· Silicone protective cover – black

· RF-Attenuator – DG20_G10 (-20 dB or -100x)

· RF-Preamplifier – HV10_27G3 (+10 dB or +10x)

· High Pass Filter – HP800_G3 (800MHz)

Features:

· Antennas: Omni–directional UBB27 Isotropic 27MHz – 3.3 GHz – 360º Directional Logarithmic Periodic “LogPer” 800MHz – 3.0 GHz 45º

· AC/DC Outputs: Facilitates equipment interfacing: oscilloscopes / spectrum analyzers / full audio assessment / data logging (5 mV DC or 10 mV per digit) switchable

· LCD Display (3.5 digits): Easy to read 3.5 digit display

· Accuracy/ Linearity Deviation: +/– 3 dB

· Audible Tone:The meter’s audio tone replicates the patterns and intensity of measured RF emissions

· Signal Detection Type: Peak, Average, and Peak Hold feature – Radar / UMTS / 3G / 4G – Able to measure Analogue and Digital (pulsed) separately

· Power Supply: Rechargeable battery (NIMH supplied) – compatible with 9 Volt alkaline battery

· Battery Recharging Unit: 12VDC battery charger supplied

· Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display

· Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing

· Operating Time: NIMH provides up to 7 hours continuous use/ alkaline disposable provides up to 24 hrs continuous EMF testing

· Measuring Ranges:0.01 – 19.99 µW/m² // 00.1 – 199.9 µW/m² // 0.01 – 19.99 mW/m² Capable of 1,999 mW/m² with the external DG20_G3 Attenuator 100x)
Capable of 0.001 µW/m² with the external HV10_27G3 Amplifier (10x)
Capable of 100 nW/m² with the external HV30_27G3 Amplifier (100x)
Capable of 100 nW/m² with the external HV20_2400G10 Amplifier (100x)

· Carrying Case: Sturdy plastic storage/carrying case included

Calibration: During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every HF59B meter made by Gigahertz has been individually calibrated to a traceable standard.

Technical Data:

Frequency Range of Meter:	27 MHz to 3.3 GHz
Measurement Ranges 1:	Fine: 0.01 – 19.99 microwatts / square meter ~– 70 dBm
Measurement Ranges 2:	Medium: 0.1 – 199.9 microwatts / square meter ~– 60 dBm
Measurement Ranges 3:	Course: 1.0 – 1999 microwatts / square meter ~ – 50 dBm
Attenuation:	Modules available to extend the scales in increments of 20db
Antenna:	Ultra Broadband Isotropic Antenna (UBB27) 27Mhz to above 3.3 GHz +
	Standard True Logarithmic Periodic Antenna 800 MHz – 3.0 GHz
	Both horizontally and vertically polarized
	Antenna polarized for improved h/v decoupling, minimized ripple
	Compensated log./per. Antenna for signals under 800 MHz
Signal Evaluation:	True Peak and average
Accuracy:	+ / – 3.0 dB
Linearity Deviation:	+ / – 3.0 dB
Rollover:	+ / – 5 digits
Dimensions:	71x225x31 mm (WxLxH) approx 2–3/4x9x1.25 inches
Weight:	Approx. 270 grams
Material of Case:	Plastic