| Hanna PH Transmitter with Display HI 8614L-01
The HI 8614 is a water-resistant pH transmitter designed with a high-impedance input to accept signals directly from a pH electrode. The signal is then processed by a special high-impedance amplifier, which transmits an output current directly proportional to the input signal but independent of changes in load or cable capacitance. Calibration is performed by adjustment of two independent trimmers for slope and offset.
Temperature compensation is performed by the transmitter's ATC circuitry when measurements are taken with a temperature probe attached, it is also possible to substitute a fixed resistor for the temperature probe, if ATC is not required. The transmitter can be connected to HANNA® controller HI 8510, HI 8710 or HI 8711, recorders, computers or any data monitoring device that accepts 4 to 20 mA input.
Specifications
| Range |
|
HI 8614(L)-01: -2.00 to 16.00 pH / 4-20 mA |
| Resolution |
|
0.01 mA / 0.01 pH |
| Accuracy |
|
±0.02 mA / ±0.02 pH |
| Calibration |
|
offset: ±2.2 mA / ±2 pH; slope: ±0.5 mA / 86 to 116% |
| Temperature Compensation |
|
fixed or Automatic from 0 to 100°C (32 to 212°F) with HI 76608 probe |
| Input Impedance |
|
1012 Ohm |
| Output |
|
4-20 mA (isolated) |
| Temperature Probe |
|
HI 76608 |
| Protection |
|
IP 65 |
| Power Supply |
|
18-30 Vdc |
| Load |
|
max 500 Ohm |
| Environment |
|
0 to 50°C (32 to 122°F); RH max 95% non-condensing |
| Dimensions |
|
165 x 110 x 90 mm (6.5 x 4.3 x 3.5") |
| Weight |
|
1 kg (2.2 lb.) | |
All prices are in Canadian Currency