|
• Regenerative electric power can be measured
• Electric power and power factor for each phase can be confirmed
• Demand function for energy-saving measurements
• Displays 3 different data simultaneously on a large LCD screen
• Recording interval can be set between 1 second and 1 hour
• Internal non-volatile memory for non-stop recording up to 10 days
• Accepts removable compact flash memory up to 128MB for non-stop recording up to 5 years
• Direct communication with PC by USB connection
• Dual power supply: AC line or battery operation
• Kit includes: power meter, 3 Model KEW8125 clamp sensors, a set of test leads (black, green, blue, red), a USB cable and PC software, a mains power cord and 6 batteries, a 32MB Compact Flash card, and a manual in a carrying case
SPECIFICATIONS:
AC Voltage Ranges: 150.0V, 300.0V, 600.0V
AC Current Ranges: 500.0A
Frequency Range: 40 to 70Hz
Crest Factor: Voltage: up to 2.5; Current: up to 3.0
Active Power Accuracy: ±0.5% rdg. ±0.2% f.s.
Effect of Power Factor: Active Power: ±1.0% rdg cosø = ±0.5
Effective Input Range: 10 to 110% of of rating range of V and A
Interval Times: 1, 2, 5, 10, 15, 20, 30 seconds, 1, 2, 5, 10, 15, 20, 30, 60 minutes
Power Supply: DC: 6 x LR6 batteries; AC: 100-240VAC (50/60Hz)
Dimensions: 175 x 120 x 65mm
Weight: 800g, including batteries
MODEL KEW8125
AC Current Ranges: 0 to 500A
Output Voltage: 0 to 500mV (1mV/A)
Accuracy: ±0.5% rdg. ±0.1mV/A (50/60Hz)
Frequency Response: 40Hz to 1kHz
Conductor Size: ø40mm max.
Dimensions/Weight: 128 x 81 x 36mm/260g
|
All prices are in Canadian Currency.
